Manufacturers of
Rooflights, Structural Glazing,
Canopies & Walkways

SecuriGlaze

NaturaLight’s L2 SecuriGlaze Range is new to the marketplace and offers a new modern design to glass rooflight solutions.

The L2 SecuirGlaze range has been specifically designed to be utilised as a security conscious glass rooflight assembly. It is internally fixed to either an upstand structure in its own right or integrated into any of the L2 UPVC rooflight kerb ranges to give flexibility to suit most flat or inclined roofing applications.

Additionally as no fixings are visible from the external of the rooflight or from the internal of the building bringing a new dimension to rooflight aesthetic design.

This product can be internally fixed to either an upstand structure in its own right or integrated into any of our rooflight kerb ranges to give flexibility to suit most flat or inclines roofing applications.

The L2 SecuriGlaze Range is available in a range of ventilation, security and opening options:

 

Unvented

Product code: NLS300

A fixed rooflight and unvented kerb. This product should be used for areas that require natural light only.

 

Hit and Miss Titon Vents

Product code: NLS320

This product offers manually operated ventilation via a sliding mechanism mounted internally to the kerb. The vents are opened and closed as required by hand or by pole. The vents can be installed on 2 or 4 sides of the kerb. This product is ideally suited for areas that do not require a high volume of ventilation.

 

Rotary Vents

Product code: NLS330

Rotary vents offer manually operated ventilation via a rotating internal vent which allows the user to open and close the vent as required by hand or by pole. The vents can be installed on 2 or 4 sides of the kerb. This product is ideally suited to areas that do not require a high volume of ventilation.

 

Wormgear

Product code: NLS340

A brass telescopic winding mechanism is mounted internally to a 40mm high UPVC lifting frame which is fitted with galvanised steel reinforcement bars. This mechanism allows the user to remain at ground level and operate the unit with a winding rod. Wormgear rooflights offer a higher level of ventilation and can be opened up to approximately 300mm.

 

Chain Motor

Product code: NLS370

Utilises an electrically operated chain motor that is mounted to a 40mm high UPVC listing frame fitted with galvanised steel reinforcement bars. The motor is available in 24V or 230V options and has the capacity to either be wired to an open/close switch or to a control panel (please note the rooflight will be supplied as standard with the motor only, controls are available at an extra cost). Chain actuated rooflights offer a higher level of ventilation and can be opened to approximately 300mm.

Height: 300mm
Glazing: Can accept a double or triple glazed glass from 22.4mm to 32.8mm
Splay from base section: N/A
Base Fixing Flange: 51mm

SecuriGlaze [L2 Splayed Adaptor]

download

SecuriGlaze [L2 Advanced]

download

SecuriGlaze [L2 Securi Adaptor]

download

SecuriGlaze [L2 Standard]

download

SecuriGlaze [L2 Trade Range]

download

SecuriGlaze [L2 400 Advanced]

download